330905-00-12-05-02-RU NSv Probe / Bently Nevada

Sales Manager:

Frida

Phone/Whatsapp:

+86 15359408275

Email:

sales5@mooreplc.com

Address:

3203 Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian,China

330905-00-12-05-02-RU NSv Probe

The 330905-00-12-05-02-RU is a standard mount proximity probe from the 3300 NSv series, designed for use with the 3300 XL NSv Proximity Transducer System. It is intended for machines with tight installation requirements, such as centrifugal air compressors, refrigeration compressors, and process gas compressors where counterbore, side-view, or rear-view restrictions limit the use of standard 5 mm and 8 mm transducer systems.

This probe features an M10 x 1 metric thread and is ideal for small target applications, including measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). It offers enhanced side-view characteristics and increased chemical resistance compared to previous 3300 RAM probes.

330905-00-12-05-02-RU DETAILS

Part Number:330905-00-12-05-02-RU
Base Model:330905 - 3300 NSv Probe, M10 x 1 thread, without armor
Unthreaded Length (AA):00: 0 mm
Overall Case Length (BB):12: 120 mm
Total Cable Length (CC):05: 5.0 meters (16.4 feet)
Connector and Cable Type (DD):02: Miniature coaxial ClickLoc™ connector, standard cable
Agency Approval (EE):RU: Russia specific approval (EAC / EAC Ex)
Thread Type:M10 x 1 metric
Armor:Without armor
Mounting Style:Standard mount
Recommended Gap Setting:1.0 mm (40 mils)
Average Scale Factor:7.87 V/mm (200 mV/mil)
Probe Cable:75 Ω coaxial, FEP insulated
Temperature Range (Operating):-52°C to +177°C (-62°F to +351°F)

330905-00-12-05-02-RU

Frequently Asked Questions (FAQ)

Q: What does the "-RU" agency approval code indicate?
A: The "-RU" code indicates that this probe is certified for use in Russia with applicable hazardous area approvals. These typically include EAC (Eurasian Conformity) and EAC Ex certifications for use in potentially explosive atmospheres.

Q: What type of thread does this probe use?
A: It uses an M10 x 1 metric thread.

Q: What is the correct gap setting for this probe?
A: The recommended gap setting is 1.0 mm (40 mils) . The linear range extends from approximately 0.25 mm to 1.75 mm (10 to 70 mils) from the target.

Q: What is the maximum thread engagement length for the M10 x 1 thread?
A: The maximum recommended thread engagement length is 15 mm . Exceeding this length may cause binding during installation.

Q: What is the total cable length of this probe?
A: The total cable length is 5.0 meters (16.4 feet) , as specified by the "05" option.

Q: What is the maximum tensile strength of the probe cable?
A: The maximum rated tensile strength is 220 N (50 lb) from the probe case to the probe lead.