GE Fanuc IC610MDL115 Series One 4-Input 2-Relay Fast Response I/O Module

IC610MDL115 includes four 24 V DC input circuits and two relay output circuits. It uses eight I/O references to interface with the user program, including the mode-select references for its two outputs.

IC610MDL115 can control each output from its associated enable and disable inputs independently of the normal CPU scan. The actual state also follows the user-logic conditions and truth table documented by GE.

IC610MDL115 controls the selected output through user logic in the same manner as another discrete output. The associated fast-response inputs do not directly affect that output while manual mode is selected.

IC610MDL115 has a specified minimum input pulse width of 1 ms. This input specification must be distinguished from mechanical relay output response; the relay contacts do not switch in 1 ms.

IC610MDL115 provides its input switching voltage internally. GE identifies four 24 V DC inputs and a 36 V DC open-circuit maximum; field wiring must follow the module’s input circuit diagram.

IC610MDL115 uses two non-solid-state relay outputs over a documented 5–265 V AC/DC range. Permissible current depends on voltage and load type; use GE’s relay-current table rather than applying one current figure to every load.