spandoek
Producten
Huis /

SIEMENS

/Siemens 6ES5955-7NC11 SIMATIC S5-155H PS 955 Power Supply Unit
Siemens 6ES5955-7NC11
Siemens 6ES5955-7NC11
Siemens 6ES5955-7NC11

Siemens 6ES5955-7NC11 SIMATIC S5-155H PS 955 Power Supply Unit

Siemens SIMATIC S5-155H · PS 955

6ES5955-7NC11

The 6ES5955-7NC11 is the Siemens PS 955 power supply for the CC 155H subrack. The Siemens S5-155H manual identifies this exact article and states a nominal 24 V DC input with 5 V DC / 14 A and 24 V DC / 1 A outputs.

NOMINAL INPUT24 V DC
MAIN OUTPUT5 V DC / 14 A
AUXILIARY OUTPUT24 V DC / 1 A
DESIGNATED SUBRACKCC 155H
MANUFACTURERSiemens
CONDITION / WARRANTYOriginal New · One-Year Warranty
ISO CERTIFICATIONISO-Certified Product
VERIFICATION● Product photos and videos provided after inquiry
REQUEST A QUOTE
MODEL SEARCHFind a specific part numberOpen the best-matched Moore Automation product page directly.
SIEMENS ● SIMATIC S5-155H PS 955
Siemens SIMATIC S5-155H

6ES5955-7NC11

PS 955 power supply unit for CC 155H

PS 955 power supply unit for CC 155H

PRODUCT ROLE
6ES5955-7NC11 is the Siemens PS 955 rack power supply intended for CC 155H. It supplies operating voltages to subrack modules via the backplane and does not provide load voltage for signal modules.
TECHNICAL CONTEXT
For 6ES5955-7NC11, the Siemens S5-155H manual names this exact power-supply unit and specifies 24 V DC nominal input, 5 V DC / 14 A and 24 V DC / 1 A outputs. It requires a safely isolated 24 V source because input and output are not safely isolated internally.
👩‍💼
WANT THE BEST PRICE?
Frida
Sales Leader 🏆
EMAILsales5@mooreplc.com WHATSAPP+86 153 5940 8275
MANUFACTURER-REFERENCE CHARACTERISTICS

Technical Specifications

Contact Frida for documentation ↗
SIMATIC S5-155H PS 955 Power Supply

Engineering data at a glance

Click “+” to expand more specifications.

INPUT24 V DC
MAIN OUTPUT5 V / 14 A
AUXILIARY OUTPUT24 V / 1 A
SUBRACKCC 155H
Siemens S5-155H Programmable Controller Manual, Part IV, Chapter 3, names 6ES5 955-7NC11 and specifies its ratings and CC 155H-only use.
S5-155H SUBRACK POWER6ES5955-7NC11 supplies 5 V and 24 V operating voltages to modules in the CC 155H subrack over the backplane. It does not provide load voltages for signal modules; use a safely isolated 24 V DC input supply.
General Information −
BrandSiemens
Part number6ES5955-7NC11
Product typePS 955 power supply unit
Controller systemSIMATIC S5-155H
Designated subrackCC 155H
Nominal input24 V DC
Output 15 V DC / 14 A
Output 224 V DC / 1 A
Physical Data +
Supply pathBackplane operating voltages
Signal-module load powerNot provided by this unit
Function & Configuration +
Input isolation requirementSafely isolated 24 V DC source
Internal input-output isolationNo safe isolation
Backup batteryOptional arrangement
Source: Siemens S5-155H Programmable Controller Manual, Part IV, Chapter 3, names 6ES5 955-7NC11 and specifies its ratings and CC 155H-only use.
FAQ

Questions Buyers Ask Most

Which CC 155H circuits does 6ES5955-7NC11 feed through the backplane, and which field loads remain external?+

6ES5955-7NC11 is the PS 955 supply intended only for the CC 155H subrack. It feeds operating voltages to the installed modules through the backplane, but not the external load voltage required by signal modules.

Why must the 24 V DC source feeding 6ES5955-7NC11 provide safe isolation?+

6ES5955-7NC11 has a nominal 24 V DC input. The Siemens manual requires the external 24 V supply to have safe isolation because this power supply does not safely isolate input from output.

How should the CC 155H load be checked against the 5 V / 14 A and 24 V / 1 A outputs of 6ES5955-7NC11?+

6ES5955-7NC11 delivers a 5 V DC / 14 A output and a 24 V DC / 1 A output for CC 155H module operation. Verify the installed rack load against these ratings before commissioning.

Can 6ES5955-7NC11 also energize signal-module field loads in the rack?+

6ES5955-7NC11 does not provide the field load voltage for signal modules. Siemens assigns it to backplane operating power, so any required signal-module load supply must be designed separately.

How should optional backup-battery requirements be checked when ordering 6ES5955-7NC11?+

6ES5955-7NC11 supports an optional monitored backup-battery arrangement in the S5-155H manual. Do not assume a battery is included with the ordered unit; confirm the installed rack configuration and required retention scheme.

Can 6ES5955-7NC11 be moved from CC 155H to another S5-155H rack?+

6ES5955-7NC11 is expressly intended only for the CC 155H subrack according to the Siemens manual. Match the complete article number, rack, input source and output demand before selecting a supply.

Which input, output and rack details should be provided to source 6ES5955-7NC11?+

6ES5955-7NC11 should be specified by its complete article number with CC 155H rack details, 24 V input source, module loads, backup-battery requirements and quantity. These checks help distinguish it from other PS 955 variants.

CONTACT PRODUCT SPECIALIST

Check your configuration with Frida

Share the full 6ES5955-7NC11 article number, CC 155H subrack, 24 V DC input source, module loads, battery requirement and quantity.

CHOOSE A DIRECT CONTACT METHOD
DATA SHEET

Product Information for
6ES5955-7NC11

Product information and support route for the exact Siemens article number 6ES5955-7NC11.

Official Siemens S5-155H manual

The Siemens S5-155H Programmable Controller Manual, Part IV Chapter 3, explicitly names 6ES5 955-7NC11 and documents its 24 V DC input, two rated outputs, CC 155H installation and safe-isolation requirement.

OPEN OFFICIAL MANUAL PDF

Contact to Get Support

Send the complete model, quantity, and your technical or purchasing question.

Siemens S5-155H Programmable Controller Manual, Part IV, Chapter 3, Power Supply Unit 6ES5 955-7NC11.

MODEL IDENTIFICATION

Exact Siemens reference for 6ES5955-7NC11

6ES5955-7NC11 is the complete Siemens article for the PS 955 power supply identified in the S5-155H manual. The manual identifies the 955 supply family and this listed 7NC11 configuration for CC 155H.

Siemens · BRAND
Siemens SIMATIC S5-155HPS 955 Power Supply Unit
SIMATIC S5 FAMILY

6ES5

The 6ES5 prefix identifies the SIMATIC S5 order-number family; this does not decode the remaining legacy suffix.

PS 955 FAMILY

955

The S5-155H manual identifies the 955 series as the PS 955 rack power-supply family; the exact 7NC11 article is the CC 155H unit.

Product identification: Siemens SIMATIC S5-155H PS 955 power supply, article 6ES5955-7NC11; 24 V DC nominal input, 5 V / 14 A and 24 V / 1 A outputs.
APPLICATION AREAS

Application functions for 6ES5955-7NC11

CC 155H Rack PowerBackplane operating voltages for CC 155H
S5-155H ControllerPower feed for installed controller modules
INDUSTRIAL AUTOMATION APPLICATIONS 6ES5955-7NC11 SIMATIC S5-155H PS 955
Dual DC Outputs5 V / 14 A and 24 V / 1 A rails
Safe Input SupplySafely isolated external 24 V input
ABOUT MOORE AUTOMATION

A trusted industrial automation sourcing partner

Moore Automation Limited supplies industrial automation spare parts to customers worldwide, with dedicated sourcing, part-number verification, pre-shipment confirmation and responsive sales support.

Global sourcing Pre-shipment verification One-year warranty
SERVICE

Industrial Automation Order Support

A clear workflow for sourcing, verification, shipment preparation, delivery and product assurance.

STAGESERVICE ACTIONWHAT WE CHECK OR PROVIDE
01PROCUREMENT
Product SourcingCurrent, hard-to-find and discontinued industrial automation parts.
02VERIFICATION
Part Number ReviewComplete model, suffix, nameplate, visible revision and application details.
03CONFIRMATION
Pre-Shipment CheckModel, label, condition and packaging confirmed with actual photos or video.
04FULFILLMENT
Global Delivery
Worldwide delivery with flexible shipping options. We support door-to-door pickup or delivery to your nominated freight forwarder in China.
DHLFedExUPSTNT
05ASSURANCE
One-Year WarrantyOne-year warranty from delivery for products supplied by Moore Automation.
Warranty Claim Information+
What to provide: If a product-related issue occurs within the warranty period, contact our team and submit one clear, continuous video for review.
✓Complete product and nameplate
✓Power supply and wiring connections
✓Installation and operating conditions
✓Indicator lights, alarms or error messages
✓Clear description of the fault
✓Continuous video showing the issue
Review outcome: If the evidence confirms a covered product fault, Moore Automation will arrange the appropriate warranty solution.
SALES ASSISTANCE

Contact Sales Manager Frida

Include the complete part number, quantity and delivery destination.

EMAILsales5@mooreplc.com WHATSAPP+86 153 5940 8275
Same-brand recommendations

Siemens Related Models

SIEMENS ↗Grouped by automation, networking and interface technology
Customers Also Source from Moore

Hot-selling Models

Select a brand to view models
OTHER BRANDSA rotating mix of industrial automation models
Rotork60-114BIIndustrial Automation Part
Other brands190-B0-130-01Industrial Automation Part
Other brands510-CIndustrial Automation Part
Westlock Controls2649ABYN00022AAA-AR2Industrial Automation Part
Other brands6730DIndustrial Automation Part
Other brands09890Industrial Automation Part
ResideoFG-1625SNIndustrial Automation Part
HoneywellFG1625TASIndustrial Automation Part
ResideoGD250W4NBIndustrial Automation Part
HoneywellH2W2PRV3Industrial Automation Part
HoneywellHCC-690NA-EIndustrial Automation Part
B&RX20SC0842Industrial Automation Part
laat een bericht achter
Als u geïnteresseerd bent in onze producten en meer details wilt weten, laat dan hier een bericht achter, we zullen u zo snel mogelijk antwoorden.
  • PLC
  • DCS
  • TSI
  • HMIS
gerelateerde producten